
MA Type 2 & 3
MA BG2 and BG3
MA Type 2 & 3
Description:
- without shaft seal
- streamlined housing made of PP or ETFE
- volume flow of MA pump type 2 is up to 80 l/min, of MA pump type 3 up to 100 l/min
- discharge head of MA pump type 2 is up to 8m.Wg, of MA pump type 3 up to 15m.Wg
- horizontal single-stage monoblock design

Technical characteristics
Size | 7/70 | 8/80 | 15/40 | 10/100 | ||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Material | PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced) | |||||||||||
Max. delivery head in [m.WG] 50 Hz | 7 | 8 | 15 | 10 | ||||||||
Max. volume flow in [l/min] 50Hz | 70 | 80 | 40 | 100 | ||||||||
Max. density in [g/cm3] 50Hz ** | 1.9 | 1.1 | 1.1 | 1.4 | ||||||||
Motor capacity in [kW] | 0.18 | 0.18 | 0.25 | 0.25 | ||||||||
Current rating (400V, 50Hz) in [A] | 0.54 | 0.54 | 0.71 | 0.71 | ||||||||
Rated speed in [rpm] at 50Hz /60Hz | 3000/3600 | |||||||||||
Suction port | filetage 1" ou 1 1/2" avec adaptateur | |||||||||||
Discharge port | filetage 1" ou 1 1/2" avec adaptateur | |||||||||||
Voltage in [V] | 230V CA ou 230/400V CA triphasé | |||||||||||
Protection class | IP 55 | |||||||||||
Max. flow velocity in [m/s] | côté aspiration = 1 / côté refoulement = 3 | |||||||||||
Approx. weight for PP/ETFE in [kg] | 5.6 | 5.6 | 6 | 6 | ||||||||
Max. temperature for PP/ETFE in [°C] | 70/80 | |||||||||||
Max. system pressure for PP/ETFE at 20°C in [bar] | 1.5 | 1.5 | 3 | 3 | 2 | 2 |
* Material used for housing, impeller unit and rear casing: (sheath of inner magnet made of PP without fibre reinforcement, type MA-15/40 is not available in ETFE.) ** approx. value at max. volume flow (higher density possible when flow rate is reduced)
Accessories
Motor accessories
- ON/OFF switch with 2.5m cable and plug (230V AC only)
- 5m three-phase connection cable with CEE plug of 5×16 A, fully assembled
- Frequency converter of IP class 65, mounted directly to the motor or for wall mounting
Slip-on flanges
to screw onto threaded ports including O-rings *

Thread adapters
to screw onto threaded ports including O-rings connecting with insert fitting and spigot nut *

Hose connections
Three-piece hose connections with spigot nut and hose nipple.

Also available are port seals, shut-off and check valves etc. suitable to any MAGSON pump. Our product specialists will be glad to help you!