MA Type 5
MA BG5
Description:
  • without shaft seal
  • streamlined spiral housing made of PP or ETFE
  • volume flow of up to 320 l/min
  • delivery head of up to 18m.WG
  • back pull-out

   Technical characteristics

Size 10/240 13/260 15/280 18/320
Material PP (glass-fibre reinforced) / ETFE (carbon-fibre reinforced)
Max. delivery head in [m.WG] 50 Hz 10 13 15 18
Max. volume flow in [l/min] 50Hz 240 260 280 320
Max. density in [g/cm3] 50Hz ** 1.8 1.3 2 1.2 1.7 1 1.5
Motor capacity in [kW] 0.75 0.75 1.1 0.75 1.1 0.75 1.1
Current rating (400V, 50Hz) in [A] 1.56 1.56 2.25 1.56 2.25 1.56 2.25
Rated speed in [rpm] at 50Hz /60Hz 3000/3600
Suction port DN 40 (alternativ G 2 1/4")
Discharge port DN 40 (alternativ G 2 1/4")
Voltage in [V] Wechselstrom 230, bzw. Drehstrom 230/400
Protection class IP 55
Max. flow velocity in [m/s] saugseitig 1 / druckseitig 3
Approx. weight for PP/ETFE in [kg] 22 22 25 22 25 22 25
Max. temperature for PP/ETFE in [°C] 70/80
Max. system pressure for PP/ETFE at 20°C in [bar] 3,2 3,2 3,2 3,2 3,2 3,2 3,2

* Material used for housing, impeller unit and rear casing: (sheath of inner magnet made of PP without fibre reinforcement) ** approx. value at max. volume flow (higher density possible when flow rate is reduced) *** alternative G 1 1/2"

   Performance charts

   Dimension sheet

   Accessories

Motor accessories

  • ON/OFF switch with 2.5m cable and plug (230V AC only)
  • 5m three-phase connection cable with CEE plug of 5×16 A, fully assembled
  • Frequency converter of IP class 65, mounted directly to the motor or for wall mounting

Slip-on flanges

to screw onto threaded ports including O-rings *

Losflansche MAGSON 5

Thread adapters

to screw onto threaded ports including O-rings connecting with insert fitting and spigot nut *

Hose connections

Three-piece hose connections with spigot nut and hose nipple.

Also available are port seals, shut-off and check valves etc. suitable to any MAGSON pump. Our product specialists will be glad to help you!